| |
|
|
| |
|
|
Inclusive® Mini Implant System |
|
|
TECHNICAL NOTES
Sterility –
Inclusive Mini implants are shipped sterile. They are for single use only, prior to the expiration date. Do not use implants if the packaging has been compromised or previously opened. Steam sterilize the surgical tray using standard sterilization protocol.
Quality –
Inclusive Mini Implants are manufactured in accordance with the strictest quality standards throughout their production process, from materials and design to final product and packaging. We ensure tight tolerances, precision machining, state-of-the-art processing and cleaning, and extensive validation testing—from fatigue strength assessment to packaging integrity analysis.
Treatment Planning–
The implant site should be inspected for adequate bone by radiographs, palpations, and visual examination. Determine the location of nerves and other vital structures and their proximity to the implant site before any drilling. Prior to surgery, ensure that the needed components, instruments and help materials are complete, functional and available in the correct amounts. Treatment of children is not recommended until growth is finished and epiphyseal closure has occurred.
Inclusive Mini Implants should always be used in sufficient quantity to prevent excessive stress on the implants-at least one pair in all cases.
Typically, Type I bone would indicate the use of 2.2 mm diameter Inclusive Mini Implants. Type II/Type III bone would indicate the use of 2.5 mm/3.0 mm diameter Inclusive Mini Implants. Type IV bone contraindicates the use of Inclusive Mini Implants.
Insertion Protocol and Immediate Loading–
The insertion protocol for Inclusive Mini Implants is considered minimally invasive, and should be strictly adhered to. Using the correct insertion protocol will allow Inclusive Mini Implants to be immediately loaded after placement, provided primary stability and appropriate occlusal loading are assured.
Surgical Procedure Precautions–
Minimizing tissue damage is crucial to successful implant osseointegration. Care should be taken to eliminate sources of infection, contaminants, surgical and thermal trauma. All drilling procedures should be performed at 1200 RPM or less under continual, copious irrigation. All surgical instruments used must be in good condition, and should be used carefully to avoid damage to implants or other components. Implants should be placed with sufficient stability (35 Ncm recommended); however, insertion torque greater than 45 Ncm may result in implant fracture, or fracture or necrosis of the implant site. Since implant components and their instruments are very small, precautions should be taken to ensure that they are not swallowed or aspirated by the patient.
Prosthetic Procedure Precautions–
All components that are used intra-orally should be secured to prevent aspiration or swallowing. Distribution of stress is an important consideration. Care should be taken to avoid excessive loads significantly transverse to the implant axes.
|
|
| |
|
|
|
|
|
