| |
|
|
| |
|
|
Inclusive® Implant Abutments
|
-
Introduction
CAD/CAM Waxing Sleeve Clinical Technique
Figure #1 Place screw into waxing sleeve and engage onto the implant analog in the working model.
-
Figure #2
Adjust waxing sleeve using a low-speed handpiece.
-
Figure #3
After the wax-up is complete, remove from model and mark the gingival margin with a black marker.
-
Figure #4
When the abutment is placed back on the model, the black line will indicate the margin in relation to the soft tissue. Adjust as required, relieve undercuts and finalize surface smoothness.
Internet Explorer 7.0 Users: This page is optimized for Internet Explorer 8.0 and above.
|
| |
|
|
|
|
|
