| |
|
|
| |
|
|
Simply Natural Partials™ |
|
|
- PDF Documents
- Tech Notes
- Indications
- Preparation
- Cementation
- Working Time
- ADA Codes
TECHNICAL NOTES
The metals we use for frames are Vitallium 2000, Vitallium 2000 Plus, Titanium and Gold. Once a framework is cast, it is set with teeth and processed with either acrylic or Valplast.
For non-metal partials, we use Valplast. For temporary/transitional partials (also known as a flipper or stayplate) we would use all acrylic that can be combined with wrought wire clasps.
We provide a bite block with two central teeth at no charge (except for shipping) – premium teeth available if requested.
|
INDICATIONS / CONTRAINDICATIONS
Indicated for conventional partial denture applications. Also indicated for esthetic clasp partial
denture applications. Indicated for combination crowns with attachments and partial denture applications.
|
PREPARATION
The ideal preparation for combination PFMs is a chamfer margin preparation. If a porcelain labial margin is prescribed, then a shoulder margin preparation is required. Feather-edge margin preparations are indicated for full-cast restorations.
Clinical preparation for rest seats, guide planes, and retention undercut.
|
CEMENTATION
Panavia 21
Glass Ionomer Cement (Fuji GC)
Zinc Phosphate
Polycarboxylate
Resin Ionomer Cement (RelyX by 3M ESPE)
|
WORKING TIME
2 Days In-lab Custom Tray
2 Days In-lab Bite blocks
5 Days In-lab Partial design
5 Days In-lab Mandibular partial complete (frame only)
5 Days In-lab Maxillary partial complete (frame only)
4 Days In-lab Set-up partial teeth in wax
4 Days In-lab Reset teeth for a re-try in
5 Days In-lab Set-up teeth & finish (frame done)
4 Days In-lab After set-up to finish
5 Days In-lab Unilateral partial complete
5 Days In-lab Cast-metal palate
6 Days In-lab Mandibular titanium partial (frame only)
6 Days In-lab Maxillary titanium partial (frame only)
6 Days In-lab Unilateral titanium partial (frame only)
6 Days In-lab Titanium cast palate
3 Days In-lab Special cast components
3 Days In-lab Repair (clasp or weld)
3 Days In-lab Weld
Rush Cases : All rush cases must be pre-scheduled by calling 800-944-7874 before the case is shipped. Time of pickup and delivery may affect turnaround time.
|
ADA CODES
D5213 Upper partial - cast metal
D5214 Lower partial - cast metal
D5861 Overdenture partial
|
|
| |
|
|
|
|
|
