| |
|
|
| |
|
|
Silent Nite® Slide-Link
|
-
Introduction
How to Change Silent Nite Connectors
Figure #1 To remove the connectors, use scissors or a blade to cut off the stopper ends.
-
Figure #2
Using a new stopper and the remaining shell, reassemble the parts using finger pressure.
-
Figure #3
Push out the remaining stopper and retain the shell to attach the new connector.
-
Figure #4
Select the appropriate connector. The shorter the connector, the more anteriorization.
-
Figure #5
Use hemostats or orthodontic pliers to firmly snap the assembly together.
-
Figure #6
Tug on the connector to be sure that it is firmly attached.
Internet Explorer 7.0 Users: This page is optimized for Internet Explorer 8.0 and above.
|
| |
|
|
|
|
|
